|
|
| The
BTX MotorDrape™ is a direct-drive drapery system that operates
on 12V DC power. The unique technology of this system easily
handles 60 lbs. of drapery weight and spans 18-foot widths.
The motor can be plugged into any three-prong wall outlet and
requires no wiring. All MotorDrape™ DC model options include
a built-in infrared remote control system. A switch option is
available with the MotorDrape™ DC 1000 CCM system. |
 |
|
| Features |
 |
- Reliable
Direct Drive
- Compact
- Low
Voltage Operation
- Automatic
Limit Sensors
- Variable
Speeds
- Disengagable
clutch that allows for manual operation
- Built-in
Infrared Remote Receiver
|
|
| Parameters
|
- Max.
Width = 18 feet
- Max.
Pull Weight = 60 lbs.
- Transformer
- Input:
120V AC, 60Hz; 220V AC, 50Hz
- Output:
220V AC, 1200 mA, 14.4 VA
|
 |
|
| Model
Options for MotorDrape™ |
|
MotorDrape™
DC 1000
Standard Motorized System with Remote
The 1000 Series MotorDrape™ DC is the ideal solution
for most residential and commercial settings. The 1000 Series
is aggressively priced and easy to operate. A complete system
includes the headrail system, the motor, an IR receiving diode,
an IR handsender, the plug-in power cord and mounting brackets.
The IR receiving diode plugs into the motor by means of an
RJ-11 jack. (Extended diode is also available.) The 1000 Series
is controlled exclusively by the handsender. The handsender
can operate up to eight motors independently and is also used
to select any of the ten variable speed settings (0-9, with
0 being the slowest). Motor addresses are set electronically
through the handsender and can be changed at any time.
|
 |
MotorDrape™
DC 2000
Deluxe Motorized System with Remote and Programmable Control
Pad
The MotorDrape™ DC 2000 Series is similar to the 1000 Series
except that it features a programmable control pad. This control
pad offers the following functions:
- Control
of two separate motors (sheer and black-out drapery)
- Manual Switch
operation (open and close) for two systems
- Programmable
timer for up to eight open-close functions per 24 hours
The control pad
also operates as the IR receiving diode for the handsender and is
programmable for ten variable speeds. |
MotorDrape™
DC 1000 CCM
Contact Closure Motor
The MotorDrape™ DC 1000 CCM is specifically designed for
home theater, home automation and building management systems.
The 1000 Series CCM has the identical package as the standard
1000 Series system except for one point: The CCM allows you
to independently operate the motor via the IR handsender, a
low voltage switch or by contact closure. For contact closure,
provide two maintained dry contacts per motor. |
 |
|
MotorDrape™
DC 0500
Secondary System for Sheer and Overdrapes
The 0500 Secondary System allows two track systems to be integrated
into a sheer and a black-out drapery set. The second MotorDrape™
drapery rod will have a "secondary" motor which plugs directly
into the primary 1000 or 2000 motor. The secondary motor receives
all power and signals from the primary motor via a 6-wire connecting
signal cord and a connecting power cord. |
 |
|
| The
0500 Secondary System allows both tracks to operate independently,
but requires only one transformer and one handsender for both motors.
The 2000 Series utilizes only one wall pad for both motors. In both
cases, the wiring and hook-up are simple and the total cost is less
than that for two independent systems. |
MotorDrape™
DC 2000B
Tandem System for Heavy Draperies
Certain situations, such as heavy split-draw draperies, may
require two MotorDrape™ motors on the same headrail. The
2000B configuration requires two 2000 motors, two transformers,
one wall pad and one 5-wire connecting signal cable, which snaps
into the RJ-12 jacks. |
 |
|
MotorDrape™
DC 2000C
Simultaneous Systems for Multiple Draperies
The MotorDrape™ DC 2000 is extremely flexible and simple
to install. It permits daisychaining of up to five separate
tracks, all of which can operate simultaneously on the same
IR handsender and the same programmable wall pad. Each additional
system simply connects to the adjoining system through 5-wire
connecting signal cords with RJ-12 jacks. To order, please request
additional MotorDrape™ 2000 sub-assembly kits and one 5-wire
connecting signal cord per additional system |
 |
|
| |
| For
more information about this product, visit MotorDrape.com. |
